Atlantic OSHA Training Center
|
| |
|
| OTIEC: |
Atlantic OSHA Training Center |
| |
|
(If a Consortium)
Organization Name: |
University at Buffalo Toxicology Research Center |
| |
|
OS&H Degree /
Certificate Program Name: |
Construction Safety & Health Specialist
Certificate Program |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
5 core courses (OSHA 510, 3010, 3110, 7500, and 7505)
& 3 optional courses |
| |
|
| Credit Hours Required: |
Varies |
| |
|
| Contact: |
Joseph A. Syracuse, Ph.D. |
|
|
| OTIEC: |
Atlantic OSHA Training Center |
| |
|
(If a Consortium)
Organization Name: |
University at Buffalo Toxicology Research Center |
| |
|
OS&H Degree /
Certificate Program Name: |
General Industry Safety & Health Specialist
Certificate Program |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
5 core courses (OSHA 511, 521, 2225, 7500, and 7100)
& 4 optional courses |
| |
|
| Credit Hours Required: |
Varies |
| |
|
| Contact: |
Joseph A. Syracuse, Ph.D. |
|
California State University Dominguez
Hills
|
| |
|
| OTIEC: |
California State University
Dominguez Hills OSHA Education Center |
| |
|
OS&H Degree /
Certificate Program Name: |
Advanced Certificate in Safety
& Health |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
Two Core Courses (510 or 511 and
521) AND five additional classes. Only three courses for the Certificate
need be taken through the CSUDH Education Center. Students may transfer up
to four courses taken from other authorized OSHA Training Institute
Education Centers. Students have five years to complete the Certificate. |
| |
|
| Credit Hours Required: |
Varies |
| |
|
| For Additional Information: |
(888) 4LA-OSHA; Email; or
http://www.csuhd.edu/OSHA |
|
Construction Safety Council
|
| |
|
(If a Consortium)
Organization Name: |
The National Safety Education Center |
| |
|
OS&H Degree /
Certificate Program Name: |
The Safety and Health Specialist Certificate in
Construction |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
Current Authorized OSHA Trainers in Construction may
elect to take 5 additional core courses and elective courses from the OSHA offerings to earn this
certificate. |
| |
|
| Credit Hours Required: |
About 160 contact hours |
| |
|
| For Additional Information: |
Download PDF catalog from
www.earnyourcard.com |
|
|
(If a Consortium)
Organization Name: |
The National Safety Education Center |
| |
|
OS&H Degree /
Certificate Program Name: |
The Master Trainer in Occupational Safety and
Health Certificate |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
This certificate builds upon the Safety and Health
Specialist Certificate in Construction from the National Safety Education Center. An authorized
trainer who has earned the S&H Specialist Certificate in Construction will build upon skills
offered in a Presentation and Training Skills course, teach several OSHA 10-hr voluntary
compliance courses and successfully present a specialty topic to NSEC course or conference
attendees. |
| |
|
| Credit Hours Required: |
About 180 contact hours |
| |
|
| For Additional Information: |
Download PDF catalog from
www.earnyourcard.com |
|
Georgia Tech Research Institute
|
| |
|
| OTIEC: |
Georgia Tech Research Institute |
| |
|
OS&H Degree /
Certificate Program Name: |
Construction Safety & Health Certificate |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
3 Core Courses: 1. OTI 500 or OTI 510 or OTI 502. 2.
OTI 521. OTI 3010 or EST 7000 3 Elective Courses: Choose from any three OTI, EST or HAZ courses
not used as above core courses. |
| |
|
| Credit Hours Required: |
3 core courses & 3 elective courses (credit hours
vary) |
|
|
| OTIEC: |
Georgia Tech Research Institute |
| |
|
OS&H Degree /
Certificate Program Name: |
Construction Safety & Health Advanced Certificate |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
1. Completed Construction Safety & Health Certificate
2. Completed Safety & Health Program Management Certificate 3. Completed Hazardous Materials
Management Certificate 4. EST 6000 |
| |
|
| Credit Hours Required: |
Credit Hours Vary |
|
|
| OTIEC: |
Georgia Tech Research Institute |
| |
|
OS&H Degree /
Certificate Program Name: |
Hazardous Materials Management Certificate |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
3 Core Courses: 1. HAZ 1000 or HAZ 1002 or HAZ 1006
or HAZ 1004 or OTI 5600 2. OTI 2015 3. HAZ 1002 or HAZ 1006 or HAZ 1011 or HAZ 1010 or HAZ 1012 or
OTI 521 or OTI 2225 or OTI 2264 or OTI 5600 or OTI 7600 3 Elective Courses: Choose from any three
OTI, EST or HAZ courses not used as above core courses. |
| |
|
| Credit Hours Required: |
3 core courses & 3 elective courses (credit hours
vary) |
|
|
| OTIEC: |
Georgia Tech Research Institute |
| |
|
OS&H Degree /
Certificate Program Name: |
Industrial Safety & Health Certificate |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
3 Core Courses: 1. OTI 511 or OTI 511 or OTI 6000 or
OTI 503. 2. OTI 521. 3. OTI 2045 3 Elective Courses: Choose from any three OTI, EST or HAZ courses
not used as above core courses. |
| |
|
| Credit Hours Required: |
3 core courses & 3 elective courses (credit hours
vary) |
|
|
| OTIEC: |
Georgia Tech Research Institute |
| |
|
OS&H Degree /
Certificate Program Name: |
Industrial Safety & Health Advanced Certificate |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
1. Completed Industrial Safety & Health Certificate
2. Completed Safety & Health Program Management Certificate 3. Completed Hazardous Materials
Management Certificate 4. EST 6000 |
| |
|
| Credit Hours Required: |
Credit Hours Vary |
|
|
| OTIEC: |
Georgia Tech Research Institute |
| |
|
OS&H Degree /
Certificate Program Name: |
Occupational Safety & Health Premier Certificate |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
1. Completed Construction Safety & Health Certificate
2. Completed Industrial Safety & Health Certificate 3. Completed Safety & Health Program
Management Certificate 4. Completed Hazardous Materials Management Certificate 4. EST 6000 5. EST
7004 |
| |
|
| Credit Hours Required: |
Credit Hours Vary |
|
|
| OTIEC: |
Georgia Tech Research Institute |
| |
|
OS&H Degree /
Certificate Program Name: |
Safety & Health Program Management Certificate |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
4 Core Courses: 1. OTI 7500 2. EST 7001 3. EST 7003
4. OTI 2250 3 Elective Courses: Choose from any three OTI, EST or HAZ courses not used as above
core courses. |
| |
|
| Credit Hours Required: |
4 core courses & 3 elective courses (credit hours
vary) |
|
Great Lakes Regional OTI Education Center
|
| |
|
| OTIEC: |
Great Lakes Regional OTI Education Center |
| |
|
(If a Consortium)
Organization Name: |
University of Cincinnati |
| |
|
OS&H Degree /
Certificate Program Name: |
Construction Management |
| |
|
| Level: |
Bachelors |
| |
|
| Program Description: |
This is a five-year compulsory bachelors program in
construction management. The Program is accredited by the American Council on Construction
Education |
| |
|
| Credit Hours Required: |
205 |
| |
|
| For Additional Information: |
Dr. Benjamin Obinero Uwakweh,
513-556-6553 |
|
|
| OTIEC: |
Great Lakes Regional OTI Education Center |
| |
|
(If a Consortium)
Organization Name: |
University of Cincinnati |
| |
|
OS&H Degree /
Certificate Program Name: |
MS and PhD with Specialization in Occupational
Safety and Health Engineering |
| |
|
| Level: |
Masters |
| |
|
| Program Description: |
Both MS and PhD programs are on-campus courses in the
Department of Mechanical, Industrial and Nuclear Engineering in the College of Engineering, and in
the Department of Environmental Health in the College of Medicine (no distance learning at this
time). Admission requires an undergraduate degree in engineering or course work completed in math,
science, and engineering fundamentals. |
| |
|
| Credit Hours Required: |
The MS requires 51 quarter credit hours. The PhD
requires an additional 47 quarter credit hours plus dissertation hrs. |
| |
|
| For Additional Information: |
For program information, please contact:
Dr. Richard
L. Shell, Program Director (513) 556-2634, or
Dr. Ash Genaidy, Associate Program
Director (513) 556-6299 |
|
Indiana University of Pennsylvania
|
| |
|
(If a Consortium)
Organization Name: |
Indiana University of Pennsylvania |
| |
|
OS&H Degree /
Certificate Program Name: |
B.S. Degree in Safety Sciences |
| |
|
| Level: |
Bachelors |
| |
|
| Program Description: |
The undergraduate degree program in safety is built
on an interdisciplinary base which provides for insight into engineering, systems analysis,
management, human relations, communications and computer sciences, along with the specific areas
of occupational safety and health. |
| |
|
| Credit Hours Required: |
120 |
| |
|
| For Additional Information: |
Email |
|
|
(If a Consortium)
Organization Name: |
Indiana University of Pennsylvania |
| |
|
OS&H Degree /
Certificate Program Name: |
Certificate in Safety Sciences |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
The COR is designed for those individuals who already
have a bachelor's degree and have safety and health program activities as peripheral
responsibilities within an organization. This has been especially popular with Human Resource
Managers who have safety responsibilities within a smaller organization. |
| |
|
| Credit Hours Required: |
12 |
| |
|
| For Additional Information: |
Email |
|
|
(If a Consortium)
Organization Name: |
Indiana University of Pennsylvania |
| |
|
OS&H Degree /
Certificate Program Name: |
M.S. Degree in Safety Sciences |
| |
|
| Level: |
Masters |
| |
|
| Program Description: |
For those individuals interested in developing their
capabilities beyond the undergraduate program, IUP also offers a Masters in Safety Sciences. The
curriculum is designed to meet the need for teachers, researchers, and top-level professionals in
the field of safety sciences. |
| |
|
| Credit Hours Required: |
36 |
| |
|
| For Additional Information: |
Email |
|
Keene State College
|
| |
|
(If a Consortium)
Organization Name: |
Keene State College |
| |
|
OS&H Degree /
Certificate Program Name: |
Bachelors Degree in Safety & Technology Studies |
| |
|
| Level: |
Bachelors |
| |
|
| Program Description: |
This major prepares students for a variety of safety
and safety-related positions in industry and government. Emphasis is placed on employee
protection and cost effectiveness. Graduates might work in such areas as loss control, risk
management, institutional safety, and consulting. |
| |
|
| Credit Hours Required: |
126 Credits |
| |
|
| For Additional Information: |
(603) 358-2976;
Email |
|
|
(If a Consortium)
Organization Name: |
Keene State College |
| |
|
OS&H Degree /
Certificate Program Name: |
Construction Safety & Health Specialist
Certificate Program |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
Profession development certificate in construction
safety. Four required courses & 3 elective courses. Courses range from 1 to 5 days. |
| |
|
| Credit Hours Required: |
Varies depending on courses chosen. |
| |
|
| For Additional Information: |
1-800-449-6742;
http://www.keene.edu/conted/osha.cfm |
|
|
(If a Consortium)
Organization Name: |
Keene State College |
| |
|
OS&H Degree /
Certificate Program Name: |
Industrial Hygiene Safety & Health Specialist
Certificate Program |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
Profession development certificate in industrial
hygiene. Six required courses & 1 elective course. Courses range from 1 to 5 days. |
| |
|
| Credit Hours Required: |
Varies depending on courses chosen. |
| |
|
| For Additional Information: |
1-800-449-6742;
http://www.keene.edu/conted/osha.cfm |
|
|
(If a Consortium)
Organization Name: |
Keene State College |
| |
|
OS&H Degree /
Certificate Program Name: |
General Industry Safety & Health Specialist
Certificate Program |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
Profession development certificate in general
industry safety. Four required courses & 3 elective courses. Courses range from 1 to 5 days. |
| |
|
| Credit Hours Required: |
Varies depending on courses chosen. |
| |
|
| For Additional Information: |
1-800-449-6742;
http://www.keene.edu/conted/osha.cfm |
|
|
(If a Consortium)
Organization Name: |
Keene State College |
| |
|
OS&H Degree /
Certificate Program Name: |
Safety and Emergency Management Certificate
Program |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
24-credit-hour certificate in Safety and Emergency
Management; 5 required courses plus 3 electives; can be applied towards a degree from Keene State
College's Department of Technology, Design and Safety. |
| |
|
| Credit Hours Required: |
24 credit hours. |
| |
|
| For Additional Information: |
(603) 358-2290 |
|
Mountain West OSHA Training and Outreach Center
|
| |
|
(If a Consortium)
Organization Name: |
University of Utah |
|
|
OS&H Degree /
Certificate Program Name: |
Safety Certificate |
|
|
| Level: |
Certificate |
|
|
| Program Description: |
The Safety
Certificate Program is a noncredit program designed to provide occupational
health and safety managers of small- to medium-sized companies with the
knowledge to manage organizational safety and meet government requirements.
The program is NOT designed to make the attendee a safety professional, but
will provide the background to help him/her better manage a program and to
know when it is necessary to bring in an outside safety professional. |
|
|
| For Additional Information: |
http://uuhsc.utah.edu/rmcoeh/ContEdProg/CEhome.html or call 801-581-4055 |
|
|
|
(If a Consortium)
Organization Name: |
University of Utah |
|
|
OS&H Degree /
Certificate Program Name: |
Industrial Hygiene Certificate |
|
|
| Level: |
Certificate |
|
|
| Program Description: |
The Industrial
Hygiene Certificate Program is a noncredit program designed to provide
occupational health and safety managers of small- to medium-sized companies
with the knowledge to manage organizational safety and meet government
requirements. The program is NOT designed to make the attendee an industrial
hygiene professional, but will provide the background to help him/her better
manage a program and to know when it is necessary to bring in an outside
safety professional. |
|
|
| For Additional Information: |
http://uuhsc.utah.edu/rmcoeh/ContEdProg/CEhome.html or call 801-581-4055 |
|
|
|
(If a Consortium)
Organization Name: |
University of Utah |
|
|
OS&H Degree /
Certificate Program Name: |
Safety and Health
General Industry Specialist Certificate |
|
|
| Level: |
Certificate |
|
|
| Program Description: |
A non-credit certificate program
for experienced safety professionals who require advanced regulatory knowledge
and skills in general industry safety. Five years general industry safety
experience required. |
|
|
| For Additional Information: |
http://uuhsc.utah.edu/rmcoeh/ContEdProg/CEhome.html or call 801-581-4055 |
|
|
|
(If a Consortium)
Organization Name: |
University of Utah |
|
|
OS&H Degree /
Certificate Program Name: |
Safety & Health Construction Specialist Certificate |
|
|
| Level: |
Certificate |
|
|
| Program Description: |
A noncredit
certificate for construction workers who respond to disaster sites who require
specific knowledge about personal protective gear and other safety measures. |
|
|
| For Additional Information: |
http://uuhsc.utah.edu/rmcoeh/ContEdProg/CEhome.html or call 801-581-4055 |
|
|
|
(If a Consortium)
Organization Name: |
Salt Lake Community College |
|
|
OS&H Degree /
Certificate Program Name: |
Associate of Science degree Environmental
Technology |
|
|
| Level: |
Associates |
|
|
| Program Description: |
The Environmental Technology program provides a
student's with the necessary academic knowledge and hands on skills to work in the environmental,
health and safety field or continue on to a four year to a 4 year program and in one of many
environmental related fields. The Environmental Technology program, students learn the basics
through one-on-one contact with practicing professionals. Small classes and hands on training
allows students to solidify their knowledge and skills. |
|
|
| Credit Hours Required: |
63 |
|
|
| For Additional Information: |
Mark Dumas; 801 957-3290; www.slcc.edu |
|
|
|
(If a Consortium)
Organization Name: |
Rocky Mountain Center
for Occupational and Environmental Health –
University of Utah |
|
|
OS&H Degree /
Certificate Program Name: |
Read Below for more
information about the five graduate degrees offered, including program
requirements.
Mast of Science degree in Mechanical Engineering
(M.S. with an emphasis in Ergonomics and Safety)
This degree requires a minimum of 41 semester hours and includes 6 semester
hours of thesis research. It is appropriate for those students who may wish to
continue toward a Ph.D. or who have an interest in research as well as the
application of ergonomics and safety methodologies.
Master of Engineering degree in Mechanical Engineering
(M.E. with an emphasis in Ergonomics and Safety)
This degree requires a minimum of 32 semester hours with a project report and
has no thesis requirement. In general it is appropriate for those students who
do not plan on further graduate work.
Philosophiae Doctor degree in Mechanical Engineering
(Ph.D. with an emphasis in Ergonomics and Safety)
This degree requires a minimum of 39 semester hours of course work beyond the
Masters, and the completion of a scholarly dissertation relating to safety and
ergonomics.
Master of Science degree in Public Health
(M.S. with an emphasis in Ergonomics and Safety)
This degree requires approximately 40 semester hours and includes 10 semester
hours of thesis research. It is appropriate for those students without an
engineering background.
Master of Public Health Degree
(M.P.H. with an emphasis in Ergonomics and Safety)
This degree requires approximately 35 semester hours of course work including
a significant project. There is no thesis requirement. It is appropriate for
those students without an engineering background. |
|
|
| Level: |
Masters of Public
Health (MPH) & Ph.D. |
|
|
| Program Description: |
Students at the
University of Utah who wish to emphasize the study of Ergonomics and Safety
can pursue one of four Masters degree programs and one Ph.D. program; no
undergraduate degrees are offered specifically in E & S. For the degrees
granted in conjunction with the Department of Mechanical Engineering, incoming
students are required to have competency in the basic engineering sciences.
This competency may be demonstrated through: (1) graduation from an
engineering curriculum, (2) completion of the Fundamentals of Engineering
exam, (3) record of appropriate course work, or (4) successful completion of
appropriate course work while in residence. Students who elect any of the
Masters level programs are required to take courses in safety, ergonomics and
public health and complete an approved ergonomics/safety-related scholarly
thesis or an extensive engineering report. See the categories below for
further information. |
|
|
| Credit Hours Required: |
See above |
|
|
| For Additional Information: |
http://www.mech.utah.edu/ergo/
Contact Person: Donald Bloswick, Ph.D. Phone: (801) 581-4163 |
|
|
|
(If a Consortium)
Organization Name: |
Rocky Mountain Center for Occupational and Environmental Health –
University
of Utah |
|
|
OS&H Degree /
Certificate Program Name: |
Industrial Hygiene |
|
|
| Level: |
Masters of Public Health (MPH) & Masters of Science in Public Health (MSPH) |
|
|
| Program Description: |
The IH graduate program is designed to provide broad training in public
health, environmental health, biostatistics, and epidemiology. Building on
this public health core, additional IH education and training is required
including subjects such as Occupational health and safety, noise and other
physical agents, ventilation, industrial hygiene chemistry, and occupational
and environmental program management. Numerous other courses are available to
the student as electives and each student creates an individual study plan
with their academic advisor which meets their interests and long term goals.
This comprehensive program enables students to define occupational and
environmental public health problems, identify and evaluate effective
solutions, successfully manage appropriate intervention programs, and
effectively work with stakeholders. Actual case studies are integrated
throughout the curriculum and the student has ample opportunity for hands-on
experience using the latest techniques and equipment to recognize and evaluate
hazards. Practicing industrial hygienists in government, labor and industry
provide practical and philosophical insight into divergent points of view,
governing legislation, and evaluation and compliance requirements. Practicums,
generally under the direction of a board-certified industrial hygienist, may
be arranged with government, labor, or industry throughout the United States
or the world. These experiences allow the student to apply instruction in
actual practice settings. Inclusive in the student’s preparation is the
emphasis on developing applied skills including the capability to think
critically in reviewing technical and scientific materials and effectively
communicating information both orally and through written reports. |
|
|
| Credit Hours Required: |
MPH-IH Total Credit Hours: 45
MSPH-IH Total Credit Hours: 55 |
|
|
| For Additional Information: |
http://uuhsc.utah.edu/rmcoeh/EdProg/IH/ihproginfo.html
Contact Person: Rod Larson Phone: (801) 585-3673 |
|
National Labor College
|
| |
|
(If a Consortium)
Organization Name: |
National Labor College |
| |
|
OS&H Degree /
Certificate Program Name: |
Bachelor of Labor Studies (Safety & Health Track) |
| |
|
| Level: |
Bachelors |
| |
|
| Program Description: |
This Bachelor of Arts in Labor Studies degree offers
six tracks, including one in Safety and Health. It focuses on workplace injuries/illness and their
prevention. The program is designed using a blended approach. Students do a significant portion of
their work online with a week-long on-campus instruction period required every term. Three terms
are offered every year. OSHA courses have been assessed to fit into this degree. |
| |
|
| Credit Hours Required: |
120 semester hours |
| |
|
| For Additional Information: |
(800) 367-6742 |
|
|
(If a Consortium)
Organization Name: |
National Labor College |
| |
|
OS&H Degree /
Certificate Program Name: |
OSHA Safety and Health Specialist |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
To earn this certificate, students take two (2)
required OSHA courses and at least three (3) elective OSHA courses from a menu of choices. By
adding a course on "Teaching Techniques," successful completers can upgrade the certificate to
include "Master Trainer" status (which also adds an additional 3 credits to the student's
transcript). |
| |
|
| Credit Hours Required: |
12 semester hours |
| |
|
| For Additional Information: |
(800) 367-6742 |
|
National Safety Council
|
| |
|
(If a Consortium)
Organization Name: |
National Safety Council |
| |
|
OS&H Degree /
Certificate Program Name: |
Advanced Safety Certificate |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
Multiple course program for safety practioners |
| |
|
| Credit Hours Required: |
80 |
| |
|
| For Additional Information: |
www.nsc.org |
|
|
(If a Consortium)
Organization Name: |
National Safety Council |
| |
|
OS&H Degree /
Certificate Program Name: |
Certificate in OSHA Compliance |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
Multiple half-day courses covering most common OSHA
standards |
| |
|
| Credit Hours Required: |
24 |
| |
|
| For Additional Information: |
www.nsc.org |
|
Northern Illinois University
|
| |
|
(If a Consortium)
Organization Name: |
Northern Illinois University |
| |
|
OS&H Degree /
Certificate Program Name: |
BS in Industrial Technology/Environmental Health
and Safety Program. |
| |
|
| Level: |
Bachelors |
| |
|
| Program Description: |
A program with courses designed to provide education
and experience for future safety, health, and environmental professionals. The course work
prepares students for work in: Industrial hygiene, Industrial Safety and Health, Ergonomics and
Human Factors, Toxicology, Risk Management and Loss Control, Disaster Preparedness, Construction
Safety and Project Management, Industrial Ventilation and Air Quality, Public Health, Regulatory
Compliance, Transportation, and Occupational Health. |
| |
|
| Credit Hours Required: |
120 Semester Hours |
| |
|
| For Additional Information: |
http://www.ceet.niu.edu/depts/tech/home.html |
|
|
(If a Consortium)
Organization Name: |
Northern Illinois University |
| |
|
OS&H Degree /
Certificate Program Name: |
Construction Safety Manager Certificate |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
This certificate combines the 130-Hour Construction
Safety Coordinator Certificate Program described above with the OSHA 226 Permit Required Confined
Space Entry, OSHA 301 Trenching, Excavation and Soil Mechanics, and the OSHA 311 Fall Arrest
Systems Courses. |
| |
|
| Credit Hours Required: |
184 |
| |
|
| For Additional Information: |
www.engineeringoutreach.niu.edu |
|
|
(If a Consortium)
Organization Name: |
Northern Illinois University |
| |
|
OS&H Degree /
Certificate Program Name: |
MS in Industrial Management/Environmental Health
and Safety Program |
| |
|
| Level: |
Masters |
| |
|
| Program Description: |
The Department of Technology offers graduate studies
leading to the M.S in Industrial Management (MSIM). The objective of the program is to build upon
the competencies achieved at the baccalaureate level and to prepare students to assume managerial
and leadership roles. Course selections in the M.S. safety area include 17 topics including
selections that include ergonomics, behavioral safety, administration of industrial safety
programs, disaster preparedness, safety engineering analysis and more. The MSIM also offers
Certificates of Graduate Study for completion of course groupings, including: Industrial Project
Management, Industrial Workplace Design Systems, Strategic Industrial Management, Technology of
Quality, and Traffic Safety Education. |
| |
|
| Credit Hours Required: |
31 Semester Hours (SH) |
| |
|
| For Additional Information: |
http://www.ceet.niu.edu/depts/tech/home.html |
|
|
(If a Consortium)
Organization Name: |
Northern Illinois University, National Safety
Council |
| |
|
OS&H Degree /
Certificate Program Name: |
National Safety Education Center's Safety and
Health Certificate in General Industry |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
Current Authorized OSHA Trainers in General Industry
may elect to take 5 additional core courses and elective courses from OSHA Course offerings to
earn this certificate. |
| |
|
| Credit Hours Required: |
129 |
| |
|
| For Additional Information: |
www.earnyourcard.com |
|
|
(If a Consortium)
Organization Name: |
The National Safety Education Center |
| |
|
OS&H Degree /
Certificate Program Name: |
The Master Trainer in Occupational Safety and
Health Certificate |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
This certificate builds upon the Safety and Health
Specialist Certificate in General Industry from the National Safety Education Center. An
authorized trainer who has earned the S&H Specialist Certificate in General Industry will build
upon skills offered in a Presentation and Training Skills course, teach several OSHA 10-hr
voluntary compliance courses and successfully present a specialty topic to NSEC course or
conference attendees. |
| |
|
| Credit Hours Required: |
About 180 contact hours |
| |
|
| For Additional Information: |
Download PDF catalog from
www.earnyourcard.com |
|
Red Rocks Community College
|
| |
|
(If a Consortium)
Organization Name: |
Red Rocks Community College |
| |
|
OS&H Degree /
Certificate Program Name: |
Construction Specialist |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
Various construction specific courses (includes OSHA
#500) |
| |
|
| Credit Hours Required: |
12 |
| |
|
| For Additional Information: |
1-800-933-8394 |
|
|
(If a Consortium)
Organization Name: |
Red Rocks Community College |
| |
|
OS&H Degree /
Certificate Program Name: |
Environmental Specialist |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
Various environmental specific courses. |
| |
|
| Credit Hours Required: |
12 |
| |
|
| For Additional Information: |
1-800-933-8394 |
|
|
(If a Consortium)
Organization Name: |
Red Rocks Community College |
| |
|
OS&H Degree /
Certificate Program Name: |
Safety and Health Specialist |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
Various general industry specific courses (includes
OSHA #501) |
| |
|
| Credit Hours Required: |
12 |
| |
|
| For Additional Information: |
1-800-933-8394 |
|
Rochester Institute of Technology
|
| |
|
(If a Consortium)
Organization Name: |
Rochester Institute of Technology |
| |
|
OS&H Degree /
Certificate Program Name: |
Disaster & Emergency Management |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
Rochester Institute of Technology’s Certificate in
Disaster and Emergency Management prepares you for the worst disasters. The short-term certificate
provides aspiring emergency professionals and those in government and industry—police officers,
fire fighters, emergency medical service workers, industrial safety workers—with the skills to
respond effectively when disaster strikes. You will learn to analyze disaster threats, write
emergency plans to meet state and federal guidelines, understand problems facing response teams,
and communicate knowledgeably with expert advisors in a crisis. And you don’t even have to come to
campus! Courses are now available nationwide, delivered through distance-learning technologies! |
| |
|
| Credit Hours Required: |
24 qch |
| |
|
| For Additional Information: |
www.rit.edu/~704www |
|
|
(If a Consortium)
Organization Name: |
Rochester Institute of Technology |
| |
|
OS&H Degree /
Certificate Program Name: |
Environmental, Healthy and Safety |
| |
|
| Level: |
Masters |
| |
|
| Program Description: |
The master's degree (MS) program prepares the
individual to design and implement comprehensive and effective environmental, health and safety
(EHS) management systems that will assist the organization in which he or she works in remaining
viable as it enters the twenty-first century. The objective is to determine the appropriate EHS
goals for the organization and to develop a program to meet them as efficiently as possible. The
MS program is founded upon an extremely current and dynamic body of knowledge, the advice,
guidance and participation of leading EHS experts and continued interaction with industry and
government. |
| |
|
| Credit Hours Required: |
48 quarter credit hours |
| |
|
| For Additional Information: |
www.rit.edu/~704www |
|
|
(If a Consortium)
Organization Name: |
Rochester Institute of Technology |
| |
|
OS&H Degree /
Certificate Program Name: |
Industrial Environmental Management |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
This certificate program was designed and developed
with the active participation of RIT's Industrial Environmental Management Advisory Committee -
all experienced, practicing environmental professionals from industry who have achieved the level
of program manager or above. It covers all key elements of environmental management in industry.
Waste minimization is emphasized as a major element of pollution control in each area of
environmental management. Prerequisites include general and organic chemistry, college algebra,
and trigonometry. |
| |
|
| Credit Hours Required: |
24 qch |
| |
|
| For Additional Information: |
www.rit.edu/~704www |
|
|
(If a Consortium)
Organization Name: |
Rochester Institute of Technology |
| |
|
OS&H Degree /
Certificate Program Name: |
Safety & Health Technology |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
Designed for accessibility and convenience, this
certificate program is offered in both campus-based and online learning formats and consists of
the seven four-credit courses listed below. Transfer credits and course substitutions require the
approval of the department chair. Upon approval, these courses also may be applied toward the BS
program in safety technology. Prerequisites for this program include general chemistry, biology,
college algebra, and trigonometry. Students must achieve a program GPA of at least 2.5 in order to
be certified. |
| |
|
| Credit Hours Required: |
28 qch |
| |
|
| For Additional Information: |
www.rit.edu/~704www |
|
|
(If a Consortium)
Organization Name: |
Rochester Institute of Technology |
| |
|
OS&H Degree /
Certificate Program Name: |
Safety Technology |
| |
|
| Level: |
Bachelors of Sciences |
| |
|
| Program Description: |
The mission of the safety technology program is to
provide an academically challenging program that prepares graduates with the skills and knowledge
to address their organization’s immediate and long term safety needs, including protection and
preservation of workers, buildings, equipment and corporate reputations. This includes creating
physically safer workplaces and modifying employee behaviors. This also may include implementing
voluntary protection programs that go beyond legal and regulatory standards. This program will
respond to the changing needs of society by being able to be completed through traditional or
nontraditional (distance) means. |
| |
|
| Credit Hours Required: |
193 qch |
| |
|
| For Additional Information: |
www.rit.edu/~704www |
|
Saint Louis University
|
| |
|
(If a Consortium)
Organization Name: |
Saint Louis University |
| |
|
OS&H Degree /
Certificate Program Name: |
Occupational Safety and Health Specialist |
| |
|
| Level: |
Certificate |
| |
|
| Program Description: |
The Midwest OSHA Education Centers offer an
Occupational Safety and Health Specialist Certificate program in either construction or general
industry. These non-credit certificate programs require a minimum of 178 contact hours of
training. Up to 75 contact hours may be obtained from a different OSHA Training Institute
Education Center. |
| |
|
| Credit Hours Required: |
178 |
| |
|
|
Printing Instructions